Axis Fire Protection
Basai Enclave 2, Gurgaon, Gurugram, Haryana
GST No. 06AASFA3017D1ZT
07942957353 87% Response Rate
Send E-mail
- Home
- »
- Products & Services
- »
- Foam Equipment & Devices
| Minimum Order Quantity | 01 Piece |
| Flow Capacity | 500 LPM |
| Material | Stainless Steel |
| Body Material | Carbon Steel or Stainless Steel construction |
| Brand | HD |
| Color | RED |
| Usage/Application | Foam Systems |
| Capacity L Min | 550 LPM |
| Model Name/Number | FCA-65, FCA-80 y FCA-100 Construccion de acero al carbono FCA-S 65, FCA-S 80 y FCA-S 100 Construccio |
| Working Pressure | Working pressure 2.8 to 7 Bar (40 to 100 PSI) |
| Pressure Psi | Min 2.8 Kg/cm2 (40 PSI) Max 7 Kg/cm2 (100 PSI) |
| I Deal In | New Only |
| Approved | UL Listed and FM Approved |
| Country of Origin | Made in India |
Foam Chamber is designed to discharge expanded foam directly onto the surface of a flammable or combustible liquid for fire extinguishment. Classified as a Type II discharge device in accordance with NFPA Standard 11, foam chamber delivers low expansion foam directly onto the fuel surface. Minimizing submergence and agitation increases the effectiveness of the foam blanket, resulting in more efficient operation, and superior extinguishing capabilities. Foam chamber is UL Listed and FM approved. Foam chamber is available in four sizes and comes along with foam deflector.
Foam Chamber is used in one of the most common applications to protect vertical fixed roof (cone) liquid storage tanks, with or without internal floating roof with the low expansion foam system. Foam Chambers are UL Listed and FM approved. Foam Chamber Glass Vapour Seal is field replaceable. Please contact our sales for further details on approvals and certifications.
Description
· Sizes: 50NB, 65NB, 80NB, 100NB & 150NB (inlet)
· Flow from 100 to 1800 LPM (26 to 476 GPM)
· Carbon Steel or Stainless Steel material
· Working pressure 2.8 to 7 Bar (40 to 100 PSI)
· Epoxy painted from inside and outside
· Supplied with Stainless Steel orifice plate
· Frangible glass vapour seal
· Solid or split deflector
UL Listed and FM Approved| Minimum Order Quantity | 01 Piece |
| Material | Aluminum |
| Operating Pressure | 4.2 kg/sq.cm (60 psi) & 7 kg/sq.cm (100 psi) |
| Brand | HD |
| Color | Yellow Finish |
| Weight Kg | 3Kg |
| Usage/Application | Foam System |
| Capacity L Min | 225 lpm at 4.2 & 7 kg/ sq.cm and 450 lpm at 4.2 & 7 kg/sq.cm. |
| Certification | FM Approved with AFFF 3% & AR-AFFF 3%X3% |
| Model Name/Number | BP225-4.2, BP225-7 & BP450-4.2, BP450-7 |
| I Deal In | New Only |
| Country of Origin | Made in India |
Description
· Hand held foam branch pipe designed for long range performance
· Model BP225 and BP450
· Size: 60 NB with 2.5” Male Instantaneous Coupling at Inlet
· Aluminium Construction
· Epoxy Painted – Yellow Finish
· FM Approved (Refer to product catalogue HD196 for details)
| Flow Capacity | 500 LPM |
| Material | Stainless Steel |
| Body Material | Supplied with Stainless Steel orifice |
| Brand | HD |
| Weight | WEIGHT 50 NB - 9.9 kg (Approx.) 65 NB - 14.0 kg |
| Color | Red |
| Usage/Application | Foam Systems |
| Model Name/Number | FMA-50, FMA-65 - Carbon Steel Construction FMA-S 50, FMA-S 65 - Stainless Steel Construction |
| Working Pressure | Working pressure 2.8 to 7 Bar (40 to 100 PSI) |
| I Deal In | New Only |
| Country of Origin | Made in India |
Foam Maker is an air-aspirating foam discharge device designed to protect floating roof, flammable liquid storage tanks. Its additional applications include protection of diked flammable liquid storage and spill areas. The Foam system design guidelines generally used are in accordance with NFPA11 standard. The Foam Makers are defined by NFPA 11 as Type II discharge outlets for delivering the low expansion aspirated foam to the seal. Foam maker is UL Listed and FM Approved.
Description
· Size: 50 & 65 NB ( 2” & 2.5” )
· Flow 75 to 550 LPM
· Carbon Steel or Stainless Steel construction
· Working pressure 2.8 to 7 Bar (40 to 100 PSI)
· Epoxy painted from inside and outside
· Supplied with Stainless Steel orifice
· UL Listed and FM Approved
*Your information is safe with us.
| Brand | hd |
| Usage/Application | Fire Fighting |
| Size | 65 NB inlet |
| Color | Red |
| WORKING PRESSURE | Refer Table-I |
| APPROVAL | APPROVAL UL Listed & FM Approved Refer Table-I |
| Country of Origin | Made in India |
Rim Seal Foam Pourer is designed to discharge fully aspirated foam directly to the annular seal area of the open top floating roof storage tanks for fire or vapour suppression. Fully aspirated foam provides the most effective performance. Rim seal foam pourer is UL Listed and FM Approved. The rim seal foam pourer design provides protection from the wind, allowing the aspirated foam to gently discharge onto the protected area of the floating roof tank. Gentle application minimizes submergence and agitation, increasing the effectiveness of the foam blanket. This design allows a uniform and cohesive foam flow. The rim seal foam pourer is used in one of the most common applications of protecting tank seal in vertical liquid storage tank with internal floating roof with low expansion foam system.
Description
· Model RPA & RPA-S
· Size 65 NB
· Carbon Steel or Stainless Steel Construction
· Epoxy painted from inside and outside
· UL Listed and FM Approved
| Flow Capacity | 900 LPM |
| Material | Stainless Steel |
| Body Material | Carbon Steel or Stainless Steel construction |
| Brand | HD |
| Color | Red |
| Capacity L Min | 1400 LPM |
| Working Pressure | Working pressure 2.8 to 7 Bar (40 to 100 PSI) |
| I Deal In | New Only |
| Size | Size: 50, 65, 80 NB (2", 2.5" & 3") |
| Country of Origin | Made in India |
Description
· Size: 50, 65, 80 NB (2”, 2.5” & 3”)
· Flow 80 to 1400 LPM (21 to 370 GPM)
· Carbon Steel or Stainless Steel construction
· Working pressure 2.8 to 7 Bar (40 to 100 PSI)
· Epoxy painted from inside and outside
· Supplied with Stainless Steel orifice
· Choice of various pourers
| Material | Brass |
| Pipe Size | 2 inch |
| Nozzle Size | 1/2 inch |
| Working Pressure | MAXIMUM WORKING 12 bar (175 psi) PRESSURE |
| Type | Thread Type |
| Color | Silver&Golden |
| MODEL/Number | MODEL F1 - Stainless Steel H - Bronze |
| WEIGHT | WEIGHT 0.465 kg (Approximate) |
| APPROVAL | UL Listed and FM Approved |
| K-FACTOR | K-FACTOR K-42 Standard (K-2.95) Other K-factors can be provided as optional without Listing & Appr |
| END CONNECTION | END CONNECTION 1/2" BSPT (1/2" NPT Optional) |
| Country of Origin | Made in India |
Pendent Foam-Water Nozzles are air-aspirating foam discharge outlet sprinklers designed for use in foam-water deluge systems. They are designed for flammable liquid risks where it is desired to apply foam from overhead sprinklers and where follow-up with plain water in a standard spray sprinkler pattern is necessary. These are designed to discharge foam in a pre-determined discharge pattern. Pendent Foam-Water Nozzles are UL Listed and FM Approved.
Description
· Air aspirating type
· Bronze or Stainless Steel Material
· Finish: Natural Bronze or Staintless Steel
· Size: 1/2" BSPT / NPT
· Effective working pressure: 2.1 bar to 4.2 bar (30 to 60 PSI)
· K-factor 2.95 (42 Metric)
· Pendent mounting
· UL Listed and FM Approved