Fire Supression System

We are one of the widely acclaimed manufacturers, wholesalers, traders and retailers of Electric Panel Suppression System. The offered electric panel suppression system is specially designed for protecting the high risk electric circuitry and network. Our supplied electric panel suppression system is highly liked by the clients, due to the ease of installation in electric cabinets. The offered electric panel suppression system is very affordable in rates.

• Employs carbon dioxide for fire suppression
• Easy to install
• Optimally durable

• A complete pre-engineered system for electrical cabinets and other enclosed areas with high-risk electric circuitry

• Fast and effective fire detection and suppression for individual electrical cabinets
• Installs directly inside cabinets among circuitry - closer to where a fire can start
• A complete ready-to-install kit includes: Cylinder, Differential pressure valve, Sensor tubing, discharge tubing and nozzles, manual actuator, connectors and mounting brackets
• For use with CO2/ Clean Agent Gases extinguishing agent.

A CNC (Computer Numerical Control) machine fire suppression system is a critical safety feature designed to detect and extinguish fires that may occur during machining operations. Here's a description of its components and functionality:

1. Detection System: The fire suppression system typically incorporates sensors or detectors strategically placed within the CNC machine and its vicinity to monitor for signs of fire or excessive heat. These sensors can include smoke detectors, heat detectors, flame detectors, or combinations thereof.

2. Control Panel: The control panel serves as the central hub of the fire suppression system. It receives signals from the detection sensors and activates the suppression mechanisms when a fire hazard is detected. The panel may also provide visual and audible alerts to operators in the event of a fire.

3. Suppression Agents: Various suppression agents may be employed depending on the type of fire and the specific requirements of the CNC machine. Common suppression agents include:

   • Water: Water-based suppression systems utilize sprinklers or nozzles to dispense water onto the affected area, cooling the fire and extinguishing it.

   • Dry Chemicals: Dry chemical agents, such as dry powder or ABC powder, are effective against Class A, B, and C fires. These agents work by interrupting the chemical reaction of the fire.

   • Carbon Dioxide (CO2): CO2 systems release a high-pressure stream of carbon dioxide gas, displacing oxygen and smothering the fire without leaving residue that could damage sensitive equipment.

   • Foam: Foam-based suppression systems generate a blanket of foam to suppress the fire and prevent reignition.

4. Activation Mechanism: Upon detection of a fire, the control panel triggers the release of the suppression agent through valves or nozzles positioned at key locations within the CNC machine enclosure. The activation mechanism may be automatic or manual, depending on the system's design and safety requirements.

5. Emergency Shutdown: In addition to activating the suppression system, the CNC machine's fire safety protocol may include an automatic or manual emergency shutdown feature. This function halts all machine operations to prevent the spread of fire and protect personnel from harm.

6. Monitoring and Maintenance: Regular inspection, testing, and maintenance of the fire suppression system are essential to ensure its proper functioning in an emergency. This includes checking sensors, verifying agent levels, and replacing any faulty components.

CO2 flooding systems, also known as carbon dioxide fire suppression systems, are a type of fire suppression system commonly used in industrial and commercial settings. These systems are designed to quickly extinguish fires by flooding the protected area with carbon dioxide gas, displacing oxygen and suppressing the combustion process. CO2 flooding systems are particularly effective for extinguishing fires involving flammable liquids and electrical equipment, as they do not leave behind residue that could damage sensitive equipment.

Here's how CO2 flooding systems typically work:

1. Detection: The system detects the presence of fire through various means such as heat detectors, smoke detectors, or flame detectors.

2. Activation: Once a fire is detected, the CO2 flooding system is activated either manually or automatically depending on the setup and the level of automation in the system.

3. Release of CO2: Carbon dioxide stored in high-pressure cylinders or tanks is released into the protected area. The release can be accomplished through a network of pipes and nozzles strategically located throughout the space.

4. Displacement of Oxygen: As CO2 is discharged, it fills the protected area, displacing oxygen. Since fire requires oxygen to sustain combustion, the reduction in oxygen concentration helps extinguish the fire.

5. Fire Suppression: With the oxygen concentration lowered, the combustion process is interrupted, leading to the suppression of the fire.

6. Post-Discharge Ventilation: Once the fire is extinguished, the area may need to be ventilated to remove excess CO2 and restore safe breathing conditions for personnel.

CO2 flooding systems offer several advantages, including:

• Rapid Fire Suppression: CO2 systems act quickly to suppress fires, which can help minimize property damage and reduce downtime in industrial processes.
• Clean Agent: Carbon dioxide is a clean agent, leaving behind no residue or water damage after discharge.
• Non-Conductive: CO2 is non-conductive, making it safe for use in areas with sensitive electronic equipment.
• Environmentally Friendly: CO2 is a naturally occurring gas and does not contribute to ozone depletion.

However, there are also considerations and potential drawbacks to using CO2 flooding systems, such as the risk of asphyxiation in confined spaces if adequate ventilation is not provided after discharge and the potential for harm to personnel if they are present in the protected area during discharge due to the rapid displacement of oxygen.

Overall, CO2 flooding systems are an effective fire suppression option for many applications, but proper design, installation, and maintenance are crucial to ensure their safe and effective operation.

A fume cabinet suppression system is a safety feature designed to mitigate the risk of fire or explosion in laboratory fume hoods or cabinets where hazardous materials are handled. These suppression systems typically consist of sensors, detectors, and a suppression agent delivery system.

Here's how it generally works:

1. Detection: The system includes sensors or detectors that monitor for signs of fire or increased levels of heat within the fume cabinet.

2. Alarm: Upon detecting a potential fire or hazard, the system activates an alarm to alert laboratory personnel of the danger.

3. Suppression Agent Activation: If the threat is confirmed, the suppression system releases a fire suppression agent. The type of agent used can vary but may include water, inert gases (such as nitrogen or argon), or chemical agents (such as halon substitutes or clean agents like FM-200).

4. Suppression: The suppression agent is released into the fume cabinet to extinguish the fire or prevent its spread.

5. Shutdown: After the fire is suppressed or the hazard is mitigated, the system may shut down to prevent further release of the suppression agent and allow for safe cleanup and investigation of the incident.

Fume cabinet suppression systems are crucial for laboratories handling flammable or hazardous materials, as they help protect both personnel and property from the risks associated with fires or explosions. It's essential to regularly inspect, maintain, and test these systems to ensure they remain effective in case of an emergency.

 RAKSHAK is a specialized In-Cabinet Fire Suppression System, utilizing CO2 extinguishing agent.

Description

·         RAKSHAK” CO2 fire suppression system

·         Cylinder Sizes: 2Kg to 18 Kg

·         Operating Pressure: 60 BAR

·         Automatic IHP Valve in Brass construction

·         Diffuser nozzles: Brass/SS construction

·         Fire detection using heat-sensing tubing (UL Listed)

·         The fire detection tube on charged condition automatically fills CO2 from the cylinder. This is a unique feature where one does not require additional Nitrogen cylinder to charge the de­tection tube

 RAKSHAK is a specialized In-Cabinet Fire Suppression System, utilizing CO2 extinguishing agent.

Description

·         RAKSHAK” CO2 fire suppression system

·         Cylinder Sizes: 2Kg to 18 Kg

·         Operating Pressure: 60 BAR

·         Automatic IHP Valve in Brass construction

·         Diffuser nozzles: Brass/SS construction

·         Fire detection using heat-sensing tubing (UL Listed)

·         The fire detection tube on charged condition automatically fills CO2 from the cylinder. This is a unique feature where one does not require additional Nitrogen cylinder to charge the de­tection tube