Monitors

Monitor MG-413 is durable manual controlled monitor for fixed installation as well as trailer mounted unit. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, dykes marine and many other Industrial application.

The Monitor possess several design features that provides ease of operation and minimum maintenance. MG-413 Monitor is FM Approved.

Description

·         Hot dip galvanized Carbon steel waterway and Bronze swivel join

·         Size 100 mm (4") with 100 or 150 mm (4" or 6") flanged inlet and 4" BSP male outlet

·         Double row of Stainless Steel ball bearing with grease fittings

·         Liquid filled pressure gauge (optional)

·         Fully enclosed worm gear for horizontal and vertical movement

·         360° continuous horizontal rotation and +90°, -45° vertical elevation

·         Maximum operating pressure 12 bar (175 psi)

·         Flow up to 4750 lpm (1250 gpm) friction loss less than 10 psi

·         FM approved with VARSHA 50 master stream nozzle and solid bore nozzle NW 1000

·         Red polyurethane finish

Monitor VAJRA-433 is durable manual controlled monitor for fixed installation as well as trailer mounted unit. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, dykes marine and many other Industrial application. The monitor has cast bronze 4 inch (100MM) water way. Vajra-433 Monitor is FM Approved.

Description

·         Cast bronze construction

·         Fully enclosed gear

·         Liquid filled pressure gauge

·         Double row of Stainless Steel ball bearing with grease fittings

·         Maximum operating pressure 12 bar (175 psi)

·         115 mm waterway with 100 or 150 mm (4" or 6") flanged inlet and 4" BSP male threaded outlet

·         360° continuous horizontal rotation, +90°, -45° vertical elevation

·         Red polyurethane finish

·         FM approved with VARSHA 50 nozzle for flow up to 7575 lpm (2000 gpm)

Description

·         Hot dip galvanized carbon steel waterway and bronze swivel joint

·         Size 80, 100 or 150 mm (3", 4" or 6") flanged inlet with 3" BSP male threaded outlet

·         Double row of stainless steel ball bearing with grease fittings

·         Liquid filled pressure gauge (optional)

·         Fully enclosed worm gear for horizontal and vertical movement

·         360° continuous horizontal rotation and +90°, -45° vertical elevation

·         Maximum operating pressure 12 bar (175 psi)

·         Flow up to 3030 lpm (800 gpm) friction loss less than 10 psi

·         Red polyurethane finish

Corrosion resistant stainless steel monitor M-341 is durable manual controlled monitor for fixed installation as well as trailer mounted unit. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, dykes marine and many other industrial applications. Monitor M-341 is FM Approved. Monitor is epoxy RED painted. The balanced flow single waterway design and precision machining on swivel joints reduces friction loss and improves jet reach. Monitor M-341 is specifically designed considering ease of use and better performance.

Description

·         Stainless steel construction

·         75 mm (3") waterway with flanged inlet of 80, 100 or 150 mm (3", 4" or 6") & outlet threaded to 3" BSP male

·         Vertical and horizontal movement by handle and manual lock

·         Easy deployment by one person

·         Stainless Steel swivel joint with double row of ball bearing and grease fittings

·         Maximum operating pressure 12 bar (175 psi)

·         360° continuous horizontal rotation & +90°, -45° vertical elevation

·         FM approved with VARSHA 40 master steam nozzle having flow of 1500, 1900, 2270, 2650 & 3030 lpm (400, 500, 600, 700, 800 gpm)

Monitor VARUN-613 is durable manual controlled monitor for fixed installation as well as trailer mounted unit. It made out of carbon steel, hot dip galvanized for corrosion resistance. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, dykes marine and many other Industrial application. It is designed for installations where monitors are required with higher flows and long range straight streams. The monitor can be manually operated by a single fire fighter. Monitor nozzle is a constant flow device and changing the nozzle discharge pattern from straight stream to wide-angle fog during operation does not alter the flow.

The Monitor possess several design features that provides ease of operation and minimum maintenance. VARUN-613 Monitor is FM Approved.

Description

·         Low profile design- Hot dip galvanized Carbon steel waterway

·         Bronze swivel joint with double row of stainless steel ball bearing

·         150 mm (6") flanged inlet and outlet

·         Fully enclosed worm gear

·         Maximum service pressure 12 bar (175 psi)

·         360° continuous horizontal rotation and +90°, -65° vertical elevation

·         Liquid filled pressure gauge

·         Single lifting hook

·         Flow up to 12500 lpm (3300 gpm)

·         Red polyurethane finish

·         FM approved with VARSHA 60 master stream Nozzle with flow up to 2200 gpm

Monitor M 311 Is a galvanized steel monitor, it is durable manual controlled monitor for fixed installation as well as trailer mounted unit. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, dykes marine and many other industrial applications. M-311 Monitor is FM Approved.

Description

·         Hot-dip galvanized carbon steel waterway

·         75 mm (3") waterway with flanged inlet of 80, 100 or 150 mm (3", 4" or 6") & outlet threaded to 3" BSP male

·         Vertical and horizontal movement by handle and manual lock

·         Easy deployment by one person

·         Bronze swivel joint with double row of stainless steel ball bearing with grease fittings

·         Maximum operating pressure 12 bar (175 psi)

·         360° continuous horizontal rotation & +90°, -45° vertical elevation

·         FM approved with VARSHA 40 master steam nozzle having flow of 1500, 1900, 2270, 2650 & 3030 lpm (400, 500, 600, 700, 800 gpm)

Corrosion resistance stainless steel monitor VARUN-443 is added with electric motor to form Electric Remote Controlled Monitor. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, jetty, terminals, and many other applications. The Monitor possess several design features that provide ease of operation, minimum maintenance, and resistance to normally destructive environments. The nozzle can be fix flow, variable flow with self-inducting or through Jet Ratio Controller. The basic monitor and nozzle are UL Listed.

Description

·         Stainless steel waterway

·         Nominal size 100mm (4”)

·         Maximum operating pressure 12 bar (175 psi)

·         Electric Motor, Junction Box – explosion proof or weatherproof

·         0 to 340° rotation and -45° to +85° elevation

·         Main Control Panel – explosion proof with push button or weatherproof with joy stick

·         Variable flow with nozzle model H4-V/ H4-VJ (500/750/1000 gpm)

·         Fix Flow with nozzle model H4 (500/750/1000 gpm)

Description

·         Size 63 mm (2.5")

·         Hot dip galvanized Carbon Steel waterway and Bronze swivel joint

·         Double row of stainless steel ball bearing with grease fittings

·         Liquid filled pressure gauge optional

·         Fully enclosed worm gear for vertical movement and handle with twist lock for horizontal rotation

·         360° continuous horizontal rotation and +90°, 45° vertical elevation

·         Maximum operating pressure to 12 bar (175 psi)

·         Flow up to 2270 lpm (600 gpm) friction loss less than 10 psi

·         Red polyurethane finish